Bring your toughest design problems!

will be showcasing many projects and explaining our services at the BL Business Expo on Friday June 2nd. Please Join us.

The BL Business Expo Event, in its 13 year, showcases the products and services of over 100 Northern Virginia exhibitors and sponsors. Please contact Gaddis Architect, at [email protected], 9730701-8800, for a complimentary entry voucher. Please stop by our booth to see our projects showcased and learn about how we can help solve many tough design problems and create high performing spaces. We look forward to meeting you there.

AGENDA

8:00 am : Doors open for Guests.

(The Exhibit Hall is open NON-STOP until the end – Seminars will take place in a separate Room)
8:15 am – 9:15 am:
Making LinkedIn work for Your BusinessSeminar
Jennifer Dalton, LinkedIn Specialist
9:30 am – 10:00 am:
Opening Ceremony
National Anthem, welcome address,Sponsors recognition, with Emcee:
-Angel Livas, Media Specialist
10:15 am – 11:45 am:
Protecting Your Business, An IT perspective Seminar
-Fred Haggerty, IT Specialist
12: 00 pm – 12:30 pm:
Everything that You Ever Needed To Open A Business,
But Were Afraid To Ask
Seminar
Gerald Geddes, CPA
12:45pm – 1:30 pm:
Break the Rules & Make more SalesSeminar
Nema Semnani, Sandler Training
1:45 pm – 2:00 pm:
Door Prizes & Farewell Remarks
(We have some serious door prize for you. You would want to be there to take them home.)
Bridget Gaddis, is a Licensed Architect and LEED-accredited Professional practicing nationally, and locally in the Washington DC area. She holds professional degrees in both Architecture and Interior Design, and with a comprehensive background in commercial retail design, planning and construction has completed projects for such for such well known brands as Chloe, Zegna, and Bvlgari. Her career began in tenant coordination and site planning for two well-known Cleveland developers, followed by six years in store planning for a national retailer. After a move to New York City in 1997, she spent the next years working for architecture firms specializing in retail projects. In 2011 she started her own practice in Alexandria, VA. Ms. Gaddis is the author of two blogs dealing with architectural subjects.

Save

Wire Management is a Design Issue

The cash wrap in the photo above is in a medium high end fashion boutique in a trendy “New Urban” style shopping center with other similar competitors up and down the center. I noted the problem during a site visit I made to meet with the shop owner who was, at the time, planning a second store. Two years later, motivated by recent discussions in these “Insights” about the importance of integrating technology into a store design, I returned and took this photo. Needless to say, the problem was never addressed, neither did I ever work with this retailer.

I see mismanaged wires a lot, often in places that should, and do, know better. I listen to marketers go on about the importance of creating a shopping experience; of integrating technology into the store design; of carefully selecting technologies based on actual individual data driven market research, all the time wondering by what trickery retailers like those in the photos are able to make out that these much touted market strategies are somehow not germane to their particular retail environments. Further, I can only guess at the impact on sales – at least the place in the photo is still open – and I actually worry about the tripping hazards just waiting to happen. There is really no accounting for this when a solution is easily accomplished and not expensive.

Lest I be accused of “dis without fix,” I offer a solution here. First we are not talking store remodel or even new equipment. All that is required is some planning. Consider this cash wrap, a version of which was originally designed for a project, and which has since morphed into one of my “go to” opportunities to offer design variations on a functional theme. It is 5′ wide by 2′ deep by 3′ high at the work surface and 3’6″ high at the top of the display case. Close examination of the equipment housed in the unit will show that virtually every device housed in the badly wired cash wrap in first photo is accommodated in a compact cabinet. No wires show. The only connections are, as in the subject image above, power and data supplied by a floor outlet below the cabinet. Also, if necessary this fixture can be supplied with “knock outs” for power/data access from either side and it is on casters for mobility.

Clearly this is not a cheap piece of furniture, probably costing upwards of $1000 to build from scratch, yet when considered in terms of value added to the retail environment, it is not a lot to spend. Certainly, in terms of public safety and reduced liability it is a downright bargain. Neither is it necessary to build one of these from scratch. The rustic bench being used for the cash wrap above could easily and cheaply be remodeled by addition of an equally rustic back panel. We do this type of thing all the time.

Something else a retailer might want to consider when planning a store is that wireless technologies and newer devices are drastically reducing the amount of space needed. These are part of more than just cash wraps too. It is really important for a retailer to examine their options and choose their system(s) early. I cannot over emphasize the advantage of selecting and working with a qualified technology consultant who can help with system selection and provide a designer with device specifications including related sizes to be used in store planning and fixture design.

One more point worth noting, I see this problem show up in many showroom and public environments, not just retail stores. Because these are places where the public meets a business or organization they can, and do, impact a brand and may affect sales. I often work in these types of environments and likewise advise a client to carefully manage the wires.

Bridget Gaddis, is a Licensed Architect and LEED-accredited Professional practicing nationally, and locally in the Washington DC area. She holds professional degrees in both Architecture and Interior Design, and with a comprehensive background in commercial retail design, planning and construction has completed projects for such for such well known brands as Chloe, Zegna, and Bvlgari. Her career began in tenant coordination and site planning for two well-known Cleveland developers, followed by six years in store planning for a national retailer. After a move to New York City in 1997, she spent the next years working for architecture firms specializing in retail projects. In 2011 she started her own practice in Alexandria, VA. Ms. Gaddis is the author of two blogs dealing with architectural subjects.

Seamless integration of technology is part and parcel of 2017 market trends

Playing with an interactive light display.

Marketing Trends for 2017 – There is always a flurry of activity from marketing and PR firms at this time of year. The event put on by the Alexandria Small Business Development Center is always well attended, and this year is no different. Maurisa Potts, Fouder & CEO of Spotted MP, talking about 2017 market trends, discussed the increasing importance of interactive and visual content; digital as in media being the unstated but nevertheless operative word. Commenting in Forbes on similar trends, AJ Agrawal listed seventeen trends for 2017, twelve of which were likewise to do with digital content. The impact of technology has of course been growing every year, leading me to wonder if/when it will finally peak. Not, it would appear, anytime soon as almost all of the topics in Pott’s presentation, i.e., Interactive Content, Visual Content, Influencer Marketing, Virtual Reality, Mobile Video, Live Broadcasts, Short Form Content, Mobile First, Personalization, and Native Content, presumed digital content.

Shopping in Walmart

Data Driven Marketing – That said, it may be that the saturation point is approaching, as Potts also talked about the necessity for “Data Driven Marketing” and Lee Peterson of WD Partners talking about digital integration in VMSD Forecast for 2017 pointed out that when surveyed, for 3 years in a row the digital device most wanted by customers was BOPIS, the ability to buy online and pick up in the store. If, it would seem, last year’s omnichannel marketing was about integrating the message into the larger stream, then this year is about flushing out the individual retailers best path to success. A bike shop owner might, in 2016, have been compelled to have a presence in every possible outlet, i.e, blogs, competitions, associations, civic events, publications, website, e-commerce, indeed anything having to do with bikes or bicycling. In 2017 this bike shop owner might look closely at the data accumulated from past marketing activities and then focus on what has worked, even if the answer is unexpected. For example Kathleen Jordan writing for VMSD tells us, ” Retailers must develop new ways to reach their audience and find new sources to expand their consumer base… it must be recognized that online is not always the answer.” Did you notice she called them an audience rather than customers or shoppers.

Microsoft Surface at Hard Rock Cafe, Hollywood

Integrated Shopping Experience – Considering that almost 92 percent of all retail sales are still being transacted in physical environments and further that many online retailers end up with physical stores, I am lead to inquire, what does all this say to those of us involved with the bricks and mortar part of retail, presuming of course that it is not going away? Clearly, creating a shopping experience is still important. Eric Feigenbaum subtitled his article in VMSD, “…Retail’s divining rod no longer moves at p-o-s, but rather at p-o-e – point of experience.”

Prioritize – From my perspective, after many years working in retail design, the answer must be about priorities. The seamless integration of technology is part and parcel of the all important shopping experience and it can only be accomplished by assimilating a clients carefully worked out digital marketing plan into a store design by partnering with the technical experts. The devices of digital marketing are, after all, physical elements and as such work better when addressed in “pre” as apposed to post design.

Virtual Book at “Librovision”

If there is any doubt that this is an often neglected fact, just look around at piles of wire shoved under cabinets, dangling from display cases, hap hazardously placed equipment closets, and my personal favorite, the back side of monitors at POS stations. Certainly newer wireless technologies are available but there are always performance issues to consider, many requiring additional equipment in other areas. Most clients have enough understanding of Building mechanical systems like HVAC and plumbing to expect and allow for their accommodation, but somehow the lexicon of electronic equipment has remained a mystery, not a little, I should add, because it is in a constant state of flux. Ryan Ruud, founder and CEO of Lake One, writing for “Smart Insights” identifies Random Acts Of Technology (RAT) as marketing flops resulting from the application of technology without strategy. I would argue that this applies, as well, to the physical store design whenever non integrated electronics are treated as project add ons – and okay, I liked the buzzword too!

Bring in an Expert – Finally, I would advise any retailer aiming in 2017 for “…effective in-store digital retail experiences” to introduce a suitable technology consultant into the schematic stage of a project and then keep him or her involved up through and even after store opening. Sometimes independent and small retailers assume that these services are beyond their reach. On the contrary, I have found that most electronic designers are also providers and as such their services are often included when they supply and install equipment. It is money well spent, almost – but not quite – as good as that spent on the Architect.

Bridget Gaddis, is a Licensed Architect and LEED-accredited Professional practicing nationally, and locally in the Washington DC area. She holds professional degrees in both Architecture and Interior Design, and with a comprehensive background in commercial retail design, planning and construction has completed projects for such for such well known brands as Chloe, Zegna, and Bvlgari. Her career began in tenant coordination and site planning for two well-known Cleveland developers, followed by six years in store planning for a national retailer. After a move to New York City in 1997, she spent the next years working for architecture firms specializing in retail projects. In 2011 she started her own practice in Alexandria, VA. Ms. Gaddis is the author of two blogs dealing with architectural subjects.

HVAC: Accounting for stuff only the birds can see!

Old Hvac Unit
Old roof top HVAC unit scheduled to be replaced.

Necessary – What has this got to do with me? I am building a chic new retail store. I need to focus on the design, merchandise displays and retail image. Who sees this? I know – I know, the space must have functioning heat and air conditioning but, really, why do I need a structural engineer? I want to put my budget were it is visible to my customers.

Most commercial HVAC units will last 15 to 20 years. They probably cost over $10M each without any distribution and, in all but special circumstances, you cannot hope to have a functional commercial space without them. They are as basic as the walls, roof, plumbing, lights, etc. So when the HVAC company, landlord, or MEP engineer says it is time to replace you can be pretty sure they are correct.

Fundamental – Few would argue that it is completely fundamental for a tenant to understand who is responsible for the original installation, subsequent maintenance, repair and eventual replacement of the heating and air conditioning in a space. Neglecting to do this would be like moving into a space that might or might not have walls, yet I am often surprised by retailers who are unclear about, even disinterested in, these issues. Until something goes wrong that is.

Bar Joist
Bar joist hold up the roof and are common in retail environments.

Required – But I digress. My intention is not to outline heating and air conditioning systems common to small commercial projects, which is nicely done here. It is, rather, to explain why structural engineering is required for the installation of an HVAC unit. Consider this; all commercial HVAC systems have parts, many of which are large, heavy and sit on something, i.e., the roof. The unit in the photo, for example, weighs upward of 1,200 pounds. Now take a critical look at the structural framing system in the other photo, and ask yourself if it looks like it will be sufficient to hold up the concentrated load created by the installation of half a ton of equipment. In this case the structure is actually holding up the unit shown, so the answer happens to be yes – barely. I point this out because in many cases, especially in existing buildings without available structural drawings, common sense might lead one to ask if a new mechanical unit weighs the same as the one being replaced. Be aware that where common sense fails, the building code does not.

Structural load calculations and drawings which have been certified by an authorized professional are required before building departments will issue a permit allowing heavy equipment to be installed in, or on, a new or existing building. This, of course, includes mechanical, as well as other types of equipment. I mention the later as an aside for all you restaurant owners out there. Restaurant equipment is heavy and installing it in old buildings like those found in historic areas can create problems for unaware owners. Also, in the case of replacement equipment, it is less involved but still necessary to evaluate a new unit even if it weighs less than the old one. In the case under consideration, the replacement HVAC unit proved to be heavier than the existing, meaning it became necessary to provide structural reinforcement before the new unit could be installed.

Roof top image shows location of existing HVAC equipment.
Roof top image shows location of existing HVAC equipment.

How – So what steps were required? How did we arrive at this conclusion? First we had a contractor go up onto the roof and take photos of the exiting equipment, including a close up view of the label. This allowed the mechanical engineer to research the existing unit with the manufacturer who was able to provide a weight. A new unit was then specified according to the new design for the space. Efforts were made to avoid additional expense by matching the new unit with the old and installing it in the same location. Eventually it was determine that, although the location could be maintained, the replacement unit was going to be heavier than the old one. Had it weighed the same or less, the mechanical engineer would have so noted it on the drawings and been done.

Since this was not the case, it became necessary for the structural engineer to completed the process. He went to he site, analyzed the structural type, crawled up on a ladder, measured the bar joist, and checked the location of the existing equipment. Upon returning to his office, he went through a series of calculations to see if the structure was sufficient to accommodate the new unit. Since it was not he had to design and specify additional reinforcement adequate for the new equipment. This information was delivered in the form of signed and sealed drawings and calculations, along with certified architectural and MEP documents, to the building department with the permit application.

Why – The point of this discussion is to show those contemplating a commercial building project what a single line in a lease assigning responsibility for the heating and air conditioning equipment can indicate. In my experience all reputable landlords give full disclosure about the age and condition of the mechanical systems in their properties. Many provide substantial construction allowances for unit replacement and other improvements. Few, though, take into consideration the amount of engineering required in order to make the actual improvement. Professional services, Architectural, Mechanical, Electrical, Plumbing and Structural, are expensive and should be accounted for in the budget for a building project. I would suggest that forewarned is forearmed.

Bridget Gaddis, is a Licensed Architect and LEED-accredited Professional practicing nationally, and locally in the Washington DC area. She holds professional degrees in both Architecture and Interior Design, and with a comprehensive background in commercial retail design, planning and construction has completed projects for such for such well known brands as Chloe, Zegna, and Bvlgari. Her career began in tenant coordination and site planning for two well-known Cleveland developers, followed by six years in store planning for a national retailer. After a move to New York City in 1997, she spent the next years working for architecture firms specializing in retail projects. In 2011 she started her own practice in Alexandria, VA. Ms. Gaddis is the author of two blogs dealing with architectural subjects.

Save

Voted One of Americas Finest Optical Retailers

Storefront Store Fixture DesignWE ARE VERY PROUD to announce that eye2eye Optometry Corner, a project that we completed in late 2015, and located in Hilltop Village Center here in Alexandria, has won Honorable Mention in the 2016 America’s Finest Optical Retailers competition put on by Invision Magazine, an important optical industry publication. We wish to extend our thanks to Dora Adamopoulos, OD for bringing such a great project. Likewise thanks to the following team members and all who participated in this project.

BC Engineers Inc.
Mesen Associates Structural Engineers
Independence Construction
Ambiance Lighting
Hermin Ohanian “Artoholic”
Ennco Display Systems
Miller Creative Solutions

Bridget Gaddis, is a Licensed Architect and LEED-accredited Professional practicing nationally, and locally in the Washington DC area. She holds professional degrees in both Architecture and Interior Design, and with a comprehensive background in commercial retail design, planning and construction has completed projects for such for such well known brands as Chloe, Zegna, and Bvlgari. Her career began in tenant coordination and site planning for two well-known Cleveland developers, followed by six years in store planning for a national retailer. After a move to New York City in 1997, she spent the next years working for architecture firms specializing in retail projects. In 2011 she started her own practice in Alexandria, VA. Ms. Gaddis is the author of two blogs dealing with architectural subjects.

Designing for Various Retail Environments

Recently Carrie Rossenfeld wrote and article for Globest.com dealing with current changes in the retail environment that are affecting how architects and designers approach a project. The title, The Changing Art of Designing Urban Retail Projects, is especially appropriate, not a little because retail store design is acknowledged as an art, but mostly because it offers a thought provoking comment on the current retail context near and dear to all of us working in the DC area; namely the shift from auto dominant to pedestrian dominant shopping. Anyone who visits this site knows that this is not the first time I have engaged this topic, it is though, the first time I am inspired to organize the various environments in which I work into a single picture as follows:

Past Trends

Urban Retail – This requires little description. It is Main street USA, whether in a big city or small. It is pedestrian dependent and spans American History from Colonial Willamsburg to Old Town Alexandria. It is an all inclusive spectrum of retail types and has become a model for current development.

Suburban Shopping Centers – Historically these followed suburban expansion after WWII supplying life’s necessities to newly mobile shoppers. A typical shopping center consisted of a grocery store, a drug store, some specialty retail, and a couple of out-lots. In time a big box was added, eventually becoming the force behind development until today we have acres of big box shopping centers. The type has come to include a range of retail offerings from outlet malls to ethnic centers merging into a sprawl-scape along major roads and axes, all depending on the car for shoppers.

 

Suburban Malls – These days almost relics, most of us have seen their rise and fall. The ones that are doing well are, some say, surviving because the others have failed. They are often in high income suburbs, connected with public transportation, draw international shoppers, boast multiple department stores, have expanded the types of anchor tenants they attract, and perhaps most important to this discussion, although dependent on the car for shoppers, the stores are designed according to a specialized pedestrian model. Local examples: Tysons Corner, Pentagon City.

 Present Trends

Mixed Use, also known as Emerging Urban, New Suburbanism, and the Mall Reborn (Don’t you love all the names?) – Of course, this is where the action is. From my standpoint – designing for individual retailers – it is where pedestrian vs. non pedestrian visibility collapses into complexity. David Kitchens, in the aforementioned article, drew attention to the challenges involved in designing for, and integrating multiple uses into a development project, telling us that “…residential, office or hospitality…needs to be intertwined with or added to existing retail..” The “repositioning” of Ballston Common and Landmark Mall were sited as local examples and in particular caught my attention because I have had inquiries from retail tenants being affected by the changes going on in these places. Architects and designers working in the mixed use environment must have confidence that they, together with stakeholders in the greater design environment, will produce a whole that is greater than the sum of the parts. They must be willing to release some control, to admit a bit of “chaos.” Kitchens put it well when he said it is about creating neighborhoods. As an independent design firm working on retail projects in many different environments, I get this better than most.

Future Trends?

Industrial/Commercial/Business Parks – Defined by the National Institute of Building Science, Light Industrial “… can include but is not limited to spaces for printing, commercial laundry, photographic film processing, vehicle repair garages, building maintenance shops, metal work, millwork,..cabinetry work…” Think specialized showrooms, i.e., kitchen, lumber, restaurant supplies, catering, swimming pools, motor cycle accessories (Really, I had one inquire). Think those moving from online sales toward brick n mortor. Think those responding to “showrooming.” Recent experience has lead me to believe that this is an overlooked retail environment and as such an opportunity. From a store design standpoint, diametrically opposite to the complexity of mixed use, their retail presence is straight forward, direct and dependent on the car for shoppers. It is a sector starting to see the value of investing in professionally designed retail showrooms.

Describing these retail environments has been a fun exercise but I didn’t do it just for fun? I did it to make a point about designing a retail store to increase sales. Few would argue that designing a retail store is involved with issues of shopper behavior, in particular how it can be influence by a store design. I have accumulated an ever multiplying list of “Strategies for Designing Your Space.” and do a presentation on the subject. The article that started this survey, on the other hand, is about the other side of the issue, specifically how shopper behavior is influenced by the environment in which a store finds itself. Of course, real estate people would sum this up as “location, location, location,” a subject that shows up in business plans and marketing activities all the time. If, though, we understand the ideas set out in the article, the issue is more complex, suggesting that the current trend is for there to be little or nothing spontaneous or random about the macro environments in which retailers find themselves. Also, I have often found that in the process of macro planning developers have let go of micro constraints typically found in places like leases and tenant handbooks. This can be deceiving, leading a retailer to overestimate their control of a project. In local terms this means that a space in a planned urban environment like the Mosaic Retail District is a lot different than a space in Georgetown or Old Town Alexandria or in a strip center or industrial complex as well. I would urge any retailer thinking about their store design to consider responding to both the macro and micro point of view. It is what has motivated me to summarize the several retail contexts listed in this post.

Bridget Gaddis, is a Licensed Architect and LEED-accredited Professional practicing nationally, and locally in the Washington DC area. She holds professional degrees in both Architecture and Interior Design, and with a comprehensive background in commercial retail design, planning and construction has completed projects for such for such well known brands as Chloe, Zegna, and Bvlgari. Her career began in tenant coordination and site planning for two well-known Cleveland developers, followed by six years in store planning for a national retailer. After a move to New York City in 1997, she spent the next years working for architecture firms specializing in retail projects. In 2011 she started her own practice in Alexandria, VA. Ms. Gaddis is the author of two blogs dealing with architectural subjects.

What do you mean by “Feasibility Assessment?”

Now What?
Now What? How do I turn this in to a new store?

Contemplation – Imagine you are a retailer contemplating this tenant space. Clearly, you might be asking yourself; “now what?” Suppose a few of the questions below move from unconscious reflection to conscious contemplation without ensuing answers, then assessing a project to see what is actually required could facilitate the decision making process and provide many benefits.

Resources – Landlord provided documents, previous project cost summaries, consultations with building departments, contractors, engineers and sometimes professional construction estimators are all resources informing project feasibility. The intent is to simplify, consolidate and summarize the probable scope of work, professional fees, construction costs and time that might be anticipated for a project. It is the purpose of a feasibility assessment and a highly recommended means of beginning most retail projects.

  • Do I need to build the walls?
  • Do I need to build the bathroom(s)
  • Why do I need 2 bathrooms?
  • Why do I need 2 entries?
  • Do I need to install the storefront system?
  • Can I use my own storefront design?
  • Do I need to have my own electric meter installed?
  • Do I need to install my own Air Conditioning and heating system?
  • What is the best mechanical system to use?
  • Is there water in the space?
  • What about hot water?
  • What about gas?
  • Where is the sewer?
  • How do I connect to it?
  • Will my store fit in this space?
  • Must I supply my own storefront sign?
  • Who will design it?
  • Can I design the store myself?
  • Can I turn a logo into a store design?
  • Where do I get the store fixtures?
  • What if I can’t find the exact fixtures that I need to display my products?
  • Are custom store fixtures required, if so who will design them?
  • What about lighting?
  • Who sets up the Point of Sale (POS) system and how do I hide the wires?
  • How do I accommodate the cabling and hard wiring for my computers?
  • How much can I expect to spend for all this?
  • A contractor told me he could build my store for $45/sq. ft. Should I believe him?
  • Do I need a building permit?
  • What does an architect charge?
  • Can I get this done in time to open before I must begin paying rent?
  • How do a pick a contractor?
  • Is the construction allowance from the landlord enough to build the store?
  • Does the location have enough parking?
  • What is the visibility from walk and drive by traffic?
  • Is this space a good choice for my project?
  • If I don’t take this space do I need to start all over with a new feasibility for a different location?

Please feel free start a discussion here and maybe even see some answers.

Bridget Gaddis, is a Licensed Architect and LEED-accredited Professional practicing nationally, and locally in the Washington DC area. She holds professional degrees in both Architecture and Interior Design, and with a comprehensive background in commercial retail design, planning and construction has completed projects for such for such well known brands as Chloe, Zegna, and Bvlgari. Her career began in tenant coordination and site planning for two well-known Cleveland developers, followed by six years in store planning for a national retailer. After a move to New York City in 1997, she spent the next years working for architecture firms specializing in retail projects. In 2011 she started her own practice in Alexandria, VA. Ms. Gaddis is the author of two blogs dealing with architectural subjects.

Retail Architect takes on karma.

Marcela's Yoga BoutiqueMarcel’s Yoga Boutique,

has turned out to be one of our most sophisticated designs. Recently completed, it was featured in the Old Town Crier, and we were also happy to answer some questions posed by Cindy Laidlaw, Principal of Laidlaw Group, the marketing communications firm who does the blog for the company who manufactures the shelving system. The content is especially informative for anyone thinking about a new retail project so I am posting some of it here along with links to the articles.

Question: Where and when did the idea for the studio start? Answer: Marcela came to me on the recommendation the local Small Business Development Center. As it turned out, my office is exactly across the street from her shop. Talk about Karma?

Question: What is your background? Answer: This is the bio that I use in many blog post. Bridget Gaddis, is a Licensed Architect and LEED-Accredited Professional practicing nationally, and locally in the Washington DC area. She holds professional degrees in both Architecture and Interior Design, and has a comprehensive background in commercial retail design, planning and construction.

Question: What was the vision of the project? Answer: Marcela had a vision that centered around the lotus flower. It is part of her logo and where we started to design. I liked the water element inherent in the lotus environment and aimed at suggesting this by the use of curved glass shelves as a feature in the shop. There is a mystique attached to the idea of yoga and one way of visually representing the calm is with open space – not so easy in a tiny shop. By merchandising mainly the walls we were able to define really nice site lines that terminate in beautiful merchandise displays while at the same time maintaining the “karma” of open space.

Question: What inspired the design? Answer: The lotus flower.

Question: In addition to Rakks, what other materials were used? Answer: We used a rustic piece of wood, with the shape of the tree still in its profile, to anchor and complete the feature wall. The effect is very organic.

Question: How long did the project take? Answer: It took about 4 months.

Question: What were the installation challenges of the space? Answer: The building is old and the exterior walls are plaster directly on furred out brick. They were totally out of plumb, to the extent that, in order to use the wall mounted Rakks standards, we had to build a drywall stand out in front of the existing wall.

Question: What is the history of the building? Answer: The building is in the historic district of Old Town Alexandria, VA.

Question: Where can I find out more about the products on display? Answer: Marcela’s Yoga Boutique

Bridget Gaddis, is a Licensed Architect and LEED-accredited Professional practicing nationally, and locally in the Washington DC area. She holds professional degrees in both Architecture and Interior Design, and with a comprehensive background in commercial retail design, planning and construction has completed projects for such for such well known brands as Chloe, Zegna, and Bvlgari. Her career began in tenant coordination and site planning for two well-known Cleveland developers, followed by six years in store planning for a national retailer. After a move to New York City in 1997, she spent the next years working for architecture firms specializing in retail projects. In 2011 she started her own practice in Alexandria, VA. Ms. Gaddis is the author of two blogs dealing with architectural subjects.