Caring for your Equipment in the Cold

Steph & Eric_DC_023 Steph & Eric_DC_024 Steph & Eric_DC_025 Steph & Eric_DC_030 Steph & Eric_DC_031 Steph & Eric_DC_033Currently I have been sequestered to my room. I have a box of tissues, a quart of oj and have digested almost an entire season of Grey’s Anatomy. Tis the season for colds and with the change in weather also comes a change in how you should handle your camera equipment in cold conditions.

Keep Your Batteries Close If you are going to be outside for a long period of time between shoots or if you are in below freezing temperatures be sure to keep your camera batteries close to your body by placing them in an interior pocket. This will keep them from losing their charge.

Treat Your Camera Like a Baby You would not leave your baby in a car overnight but I have seen countless people put their camera or other technologies in the car overnight. Think of your camera as a living thing that is sensitive to extreme temperatures. If you leave it in the cold your battery will no doubt be dead but in extreme temperatures your screen could also crack as well.

Changing Lenses If it is snowing, avoid changing your lenses outdoors. The moisture could get inside of your lens or camera body. You also want to be careful changing your lenses indoors where it is warm when coming in from the extreme cold. I tend to leave my camera and lenses in their bag put them in the coldest part of the house until they regulate again.

Fogging Up Fog could occur on your lens if you take your camera from a warm house or car into the cold. And moisture could develop when you take it back into a warm place from the cold. To avoid this, you may wish to put the camera and lens in a sealed ziplock bag until the equipment has regulated to the new environment.

What to Wear Depending on the conditions, I would wear hiking boots with wool socks and layer, layer, layer. Try to avoid bulky coats and scarves that could catch on your equipment. Instead, tuck your scarf into your jacket or sweater and employ the use of fingerless gloves.

I will be on holiday for the next three weeks so I will look forward to writing to you all again in the new year.

 

You can reach me at:

 

(202) 681-9848

[email protected]

http://www.shotinthedarkphoto.com/

 

Follow me on Facebook

Follow me on Twitter

Follow me on Google+

Sometimes we Need a Little Space

The other day I was at the park with a friend taking our little people on a hike. We got to chatting about photography and eventually about printing. My friend mentioned how frustrating it was that when she had a digital photo printed as an 8×10” that her printed image came back cropped. I then explained to her what I will now share with you, as it inevitably will affect the way that you shoot.Aspect Ratio, Printing and Cropping

Playing it Safe Take this first photo of a portrait of a family. You can see the original image, the image if it were to be printed as a 5×7” print as well as if it were printed as an 8×10”. You can see that I left enough space around the family so that I did not crop into their faces or bodies. The grayed out area shows what would be cropped from the image.

Consequences of Tight Framing However, if you look at these three photos that I took during the beginning of my photography career you will see that although the original images look well spaced, that when I went to print them, that I would lose a significant portion of the photo– thus cropping into the subject.Aspect Ratio, Printing and Cropping Aspect Ratio, Printing and Cropping Aspect Ratio, Printing and Cropping

Aspect Ratios The reason that you lose your a portion of your image when you print it comes down to ratios. Most DSLR have a sensor with an aspect ratio of 3:2 which is great if you wish to print say, 4×6” which are also at a ratio of 3:2. On the contrary, an 8×10” print will be at a 4:5 ratio, which is why some of your image will be cropped.

Choose Custom Cropping When you go to print your photo most kiosks or online printers will allow you to crop your image to the size you want, and if they are good at what they do, they will inform you if your resolution is adequate for the size you wish to print. Always choose to custom crop your image. Otherwise the default will be to center crop your image automatically cropping the same amount from each side of your image and taking the control away from you.

Native Print Sizes Some sizes that will be native to your Dslr are 4×6”, 8×12” and 12×18”. Some print sizes that are not native are 5×7”, 8×10”, 12×16”.

Work Arounds But what if you have already composed your subject in a tight shot?

1) Add a Digital Border to Your Image. Although the border will not be even, it will allow you to keep the space around your image and could create an artistic look. One time I took an image into Photoshop, created a new layer, added a gaussian blur to the bottom layer and thus had all of the colors from the image in the background layer to create a nice border. If you find this is too busy, solid white or solid black are great options as well.

2) Clone Your Image. Although tedious, cloning your image can add that extra space that you may need. In Photoshop use the Clone Stamp Tool and click “alt” to select the area you wish to clone. For faces you will want to set your opacity to around 11. For a wall or grass you could use an opacity of around 60. I almost always use a soft brush. It will take some finessing but with some practice you’ll get the hang of it.

3) Change Your Print Size. Say you want to frame your image in a 12×16” frame. Take your image and print it as an 8×12” instead of an 8×10”. Although you will have to order a custom matte for your frame you will not lose any of your image.

4) Allow Three Inches. If you are planning to print your image on canvas, try to wrap the sides of the canvas in black or white. If you would like to wrap the image around the canvas then allow yourself up to 3” around to ensure you do not lose any of you image. Assuming you wish to print a 12×18” canvas, be sure to crop your image from its RAW state into a 15×21”. The convert your file to a high resolution JPEG at 300 dpi.

Lasting Tip Give yourself more space around your subject when you take your photos. Then, when you go to print you will not have to worry about aspect ratios.

I am Meghan Stewart, a photographer and small business owner of Shot In The Dark Photography.

You may reach me at:

(202) 681-9848

[email protected]

http://www.shotinthedarkphoto.com/

 

Follow me on Facebook

Follow me on Twitter

Follow me on Google+